SG110CX

High Yield
9 MPPTs with max. efficiency 98.7%
Compatible with bifacial module
Built-in PID recovery function
Smart O&M
Touch free commissioning and remote
firmware upgrade
Online IV curve scan and diagnosis
Fuse free design with smart string current
monitoring
Low Cost
Compatible with Al and Cu AC cables
DC 2 in 1 connection enabled
Q at night function
Proven Safety
IP66 and C5 protection
Type II SPD for both DC and AC
Compliant with global safety and grid code

Technical Data

Input (DC)
Max. PV input voltage 1100 V
Min. PV input voltage / Startup input voltage 200 V / 250 V
Nominal PV input voltage 585 V
MPP voltage range 200 – 1000 V
MPP voltage range for nominal power 550V – 850 V
No. of independent MPP inputs 9
Max. number of PV strings per MPPT 2
Max. PV input current 26 A * 9
Max. current for input connector 30 A
Max. DC short-circuit current 40 A * 9
Output (AC)
AC output power 110 kVA @ 45 ℃ / 100 kVA @ 50 ℃
Max. AC output current 158.8 A
Nominal AC voltage 3 / N / PE, 400 V
AC voltage range 320 – 460 V
Nominal grid frequency / Grid frequency range 50 Hz / 45 – 55 Hz, 60 Hz / 55 – 65 Hz
THD < 3 % (at nominal power)
DC current injection < 0.5 % In
Power factor at nominal power / Ajustable power factor > 0.99 / 0.8 leading – 0.8 lagging
Feed-in phases / connection phases 3 / 3
Efficiency
Max. efficiency 98.7 %
Euro. efficiency 98.5 %
Protection
DC reverse connection protection Yes
AC short circuit protection Yes
Leakage current protection Yes
Ground fault monitoring Yes
Grid monitoring Yes
PV String current monitoring Yes
PID recovery function Yes
Overvoltage protection DC Type II / AC Type II
DC switch Yes (not available for Australia)
AC switch No
General Data
Dimensions (W*H*D) 1051*660*362.5 mm
Weight 85 kg
Isolation method Transformerless
Ingress protection rating IP66
Night power consumption < 2W
Operating ambient temperature range -30 to 60 ℃ (> 50 ℃ derating)
Allowable relative humidity range (non-condensing) 0 – 100 %
Cooling method Smart forced air cooling
Max. operating altitude 4000 m (> 3000 m derating
Display LED, Bluetooth+APP
Communication RS485 / Optional: Wi-Fi, Ethernet
DC connection type MC4 (Max. 6 mm² )
AC connection type OT terminal (Max. 240 mm²)
Compliance IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683, VDE-AR-N 4110:2018,
VDE-AR-N 4120:2018, IEC 61000-6-3, EN 50438, AS/NZS 4777.2:2015, CEI 0-21,
VDE 0126-1-1/A1 VFR 2014, UTE C15-712-1:2013, DEWA
Grid Support Q at night function, LVRT, HVRT,active & reactive power control and power
ramp rate control
*Only compatible with Sungrow logger and iSolarCloud

Product Consultation

Online Consulting