SG30CX

Sales Area
Australia
High Yield
3 MPPTs with max. efficiency 98.6%
Compatible with bifacial module
Built-in PID recovery function optoiona
Smart O&M
Touch free commissioning and remote
firmware upgrade
Online IV curve scan and diagnosis
Fuse free design with smart string current
monitoring
Low Cost
Compatible with Al and Cu AC cables
Enable DC 2 in 1 connection
Cable free communication with optional
Wi-Fi
Proven Safety
IP66 and C5 protection
Type II SPD for both DC and AC
Satisfied global safety and grid code

Technical Data

Input (DC)
Max. PV input voltage 1100 V
Min. PV input voltage / Start-up input voltage 200 V / 250 V
Nominal PV input voltage 585 V
MPP voltage range 200 – 1000 V
MPP voltage range for nominal power 550 – 850V
No. of independent MPP inputs 3
Max. number of PV strings per MPPT 2
Max. PV input current 78 A
Max. current for input connector 30 A
Max. DC short-circuit current 120 A
Output (AC)
AC output power 29.9 kVA @ 45 ℃
Max. AC output current 43.15 A
Nominal AC voltage 3 / N / PE, 230 / 400 V
AC voltage range 312 – 528 V
Nominal grid frequency / Grid frequency range 50 Hz / 45 – 55 Hz, 60 Hz / 55 – 65 Hz
THD < 3 % (at nominal power)
DC current injection < 0.5 % In
Power factor at nominal power / Ajustable power factor > 0.99 / 0.8 leading – 0.8 lagging
Feed-in phases / connection phases 3 / 3
Efficiency
Max. efficiency 98.6 %
European efficiency 98.3 %
Protection
DC reverse connection protection Yes
AC short circuit protection Yes
Leakage current protection Yes
Grid monitoring Yes
PV String current monitoring Yes
Q at night Yes
PID recovery function optional
Overvoltage protection DC Type II / AC Type II
General Data
Dimensions (W*H*D) 702*595*310 mm
Weight 50 kg
Isolation method Transformerless
Degree of protection IP66
Night power consumption ≤2 W
Operating ambient temperature range -30 to 60 ℃ (> 45 ℃ derating)
Allowable relative humidity range (non-condensing) 0 – 100 %
Cooling method Smart forced air cooling
Max. operating altitude 4000 m (> 3000 m derating)
Display LED, Bluetooth+APP
Communication RS485 / Optional: Wi-Fi, Ethernet
DC connection type MC4 (Max. 6 mm²)
AC connection type OT or DT terminal (Max.70 mm²)
Compliance IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683, VDE-AR-N 4105:2018,
VDE-AR-N 4110:2018, IEC 61000-6-3, EN 50438, AS/NZS 4777.2:2015
Grid Support Q at night function, LVRT, HVRT,active & reactive power control and power
ramp rate control

Product Consultation

Online Consulting